QM QMF18J308ST Flange-Mount Roller Bearing Units

Dimension A1:39.0 mm; Dimension L:130.0 mm; Diameter N:14.0 mm; Basic Dynamic Radial Load Rating C:24700 N; Basic Static Radial Load Rating Co:19000 N; Height T:52.4 mm; Insert Bearing IB:Stainless Steel; Dimension A2:17.0 mm; Shaft Diameter D:40 mm; Dimension DA:115.9 mm;

d:65.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:60000 N; Basic Dynamic Radial Load Rating C:92300 N; Fillet Radius ra:2.00 mm; B:33.00 mm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals & Snap-Rin;

d:17.000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:17.00 mm; Basic Static Radial Load Rating Co:14600 N; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Dynamic Radial Load Rating C:23300 N; D:62.0000 mm; Fillet Radius ra:1.00 mm;

B:148 mm; Dynamic (Cr):12 mm; D:600 mm; Pu:3120 kN; Grease:6080 kN; Oil:457.510 kN; with tapered bore:750 min-1; rs (min):5 mm; with cylindrical bore:600 min-1; Static (Cor):22.3 mm;

Cap bolt:2 x 3/4-10 UNC; J min.:295.275 mm; R2:30.163 mm; PG:1/4 NPT; Appropriate attachment bolt size G:0.75 in; A1:111.125 mm; Cap bolt, SAE grade:5; Housing:FSAF 520; Cap bolt recommended tightening torque:203.4 N·m; Initial grease fill:365.71 g;

Initial grease fill:623.7 g; End plug (suffix Y):EPR 14; PG:1/4 NPT; A1:158.75 mm; N1:28.575 mm; J min.:431.8 mm; P120°:87.2 kN; H1:160.325 mm; Housing:SAF 624; ba:67.469 mm;

Mass needle roller:2.25 g; Lw:29.8 mm; r2 max.:1 mm; Dw:3.5 mm; r1 max.:0.8 mm; r1,2 min.:0.3 mm;

Fillet Radius ra:1.00 mm; D:52.0000 mm; Sealed Speed Rating n3:8500 rpm; Basic Dynamic Radial Load Rating C:23800 N; Accessories:Two Shields; d:20.000 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; Basic Static Radial Load Rating Co:20000 N; B:25.40 mm;

Bearing limiting speed:2600 r/min; Eye bolt:2 x 3/8-16 UNC; P90°:140 kN; Da:309.999 mm; L:628.65 mm; Labyrinth ring:2 x LOR 139; H:360.363 mm; Mass pillow block:125 kg; PG:1/4 NPT; Initial grease fill:878.85 g;

Basic static load rating C0:7200 kN; Reference speed:430 r/min; D:340 mm; r1,2 min.:5 mm; H:103 mm; Fatigue load limit Pu:600 kN; Da max.:191 mm; Shaft washer:WS 89434; Limiting speed:850 r/min; Mass bearing:51.9 kg;

da min.:634 mm; D:980 mm; Limiting speed:630 r/min; D1 ≈:868 mm; Mass bearing:1100 kg; Basic static load rating C0:21200 kN; s max.:18.5 mm; F:699 mm; da max.:682 mm; Basic dynamic load rating C:9900 kN;

ra max.:1 mm; r1 min.:1 mm; dk:115 mm; Sealing solution:Triple-lip seals; α:14 °; Design (sliding contact surface combination):Steel/PTFE fabric; B:75 mm; D:130 mm; da min.:87.1 mm; Lubricant:Maintenance free &nd;

G:M 100x2; Hydraulic nut:HMV 20 E; Lock nut:KMFE 20; d1:87.313 mm; B1:97 mm; d3:130 mm; B:21 mm; d:100 mm; Mass adapter sleeve assembly:2.35 kg;

B:25 mm; C:19 mm; T:25 mm; r1s (min):1.5 mm; D:115 mm; Dynamic (Ca):104 kN; Pu:19.270 kN; a:25 mm; Static (Coa):158 kN; d2:75 mm;

Accessories:One Seal; Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8500 rpm; d:30.000 mm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:41600 N; Sealed Speed Rating n3:6300 rpm; D:72.0000 mm; B:30.20 mm;